patent numbers 6739884/ 7165994 7121849 do not scale from this print qmss-xxx-xx.xx-x-d-dp-x-xxx-xx no of pairs -016, -032, -048, -064, * -080 (per row) row specification -d: double lead style plating specification -l: light gold (use t-1m19-06.75-l) -h: heavy gold (use t-1m19-06.75-h) (all plating styles use sh1-xx-l & t-1g19-06.75-l) option **-a: alignment pin * = not tooled ** = not available with pxx option option -dp: differential pairs see fig. 1 for shield beam configuration -06.75 (see fig. 1, see note 9) packaging option -tr: tape & reel (-016 thru -048 without options -gp or -pxx, -016 thru -032 with options -gp or -pxx) ** ** -gp: guide posts (see fig. 3, sheet 2) -k: kapton pad (see fig. 2, sheet 2) -pc4: power combo 4 (.062" thick board) (see fig. 5, sheet 3) -pc8: power combo 8 (.062" thick board) (see fig. 5, sheet 3) -pt4: power combo 4 (.093" thick board) (see fig. 5, sheet 3) -pt8: power combo 8 (.093" thick board) (see fig. 5, sheet 3) [-pxx not available with -gp, -a, -k] [-pxx available on positions -016, -032 & -048 only and on lead style -06.75 only] .069 1.74 ref ((no of pos / 16) x .840[21.34]) - .035[.89] ref ((no of pos / 16) x .840[21.34]) - .020[.51] ref .84 (typ) 21.34 .16 4.00 .115 2.92 ref ((no of pos / 16) x .840[21.34]) - .265[6.73] .025 ref 0.635 .075 ref 1.91 "a" "a" 01 02 c c .022 ref 0.56 .2650 - .0020 +.0040 6.73 - 0.051 +0.102 (see notes 5, 6 & 7) .296 .006 7.52 0.15 .010 ref 0.25 .1150 - .0020 +.0040 2.92 - 0.051 +0.102 (measured terminal to terminal) .2500 6.35 .075 ref 1.91 section "a"-"a" scale 4.5 : 1 qmss-26-06.75-d-xx-a sh1-11-l t-1g19-06.75-l t-1m19-06.75-x c c c c (see note 6) see table 1 .250 6.35 ref .125 3.18 ref .035 ref 0.89 .040 ref 1.02 ((no of pos / 16) x .840[21.34]) - .105[2.67] ref (4 eq spaces @ .0750[1.905]) (typ) c .025[.64] ref normal force protrusion see note 4 c -06.75 lead style (qmss-032-06.75-x-d-dp-a shown) (mated height with qfss-04.25: .433 [11.00] ref) fig. 1 r sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .635mm differential pairs shielded terminal strip by: qmss-xxx-xx.xx-x-d-dp-x-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 08/12/03 3 1 sheet scale: 2.5:1 insulator: lcp, color: black terminal, ground plane, & shield: phos bronze f:\dwg\misc\mktg\qmss-xxx-xx.xx-x-d-dp-x-xxx-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .0015 max. 3. minimum pushout force: signal: .5 lb, shield/ground: 1 lb, power: .5 lb. 4. do not shear terminals shown; these unsheared terminals are not considered in the number of positions in the callout because they are grounded to the shields. 5. max variance of .002. 6. dimension applies to contacts & ground plane. 7. ground plane press height must be .003[.08] less than the max height or .001[.03] greater than the minimum height of the terminals. 8. parts to be packaged in trays as standard. 9. leadstyle -11 may be substituted in part callout for -06.75 for existing customers only 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision r
.25 6.35 .2650 - .0020 +.0040 6.73 - 0.051 +0.102 (see note 5) in-process 2 see table 1 .22 5.49 (((no of pos / 16) x .840[21.34]) - .251[6.38]) / 2 fig. 2 -k: kapton pad option (use k-500-300) (qmss-032-06.75-x-d-dp-a-k shown) .271 .004 6.88 0.10 .008 0.20 .002 max burr terminal details see note 4 .2650 - .0020 +.0040 6.731 - 0.051 +0.102 (see note 5) in-process 1 see table 1 "b" ref "a" ref fig. 3 -gp: guide post option (qmss-032-06.75-x-d-dp-a-gp shown) qmss-26-06.75-d-xx-a-gp .125 3.18 ref (typ) .225 5.72 ref (typ) .025[.64] ref normal force protrusion flush to .010[.25] below body .025[.64] ref normal force protrusion sheet of .635mm differential pairs shielded terminal strip by: qmss-xxx-xx.xx-x-d-dp-x-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 08/12/03 3 2 sheet scale: 2.5:1 f:\dwg\misc\mktg\qmss-xxx-xx.xx-x-d-dp-x-xxx-xx-mkt.slddrw revision r 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"d" ref "f" ref ("e" eq space(s) @ .07874[2.000]) (typ) "g" (measured on post & tail) "c" "c" "d" "d" fig. 5 -pxx option qmss-26-06.75-d-xx-pcx (see table 5) p01 p02 power combo options qmss-032-06.75-x-d-dp-pc4 shown (same as fig. 1, unless otherwise stated) [not available with -gp, -a, or -k option] [available on -016, -032 & -048 positions only .020 ref 0.50 .022 ref 0.56 "j" ref "h" ref .165 4.19 ref 2 max sway (typ) section "c"-"c" t-1m27-xx-s c "k" .100 .005 2.54 0.13 section "d"-"d" c c "l" ref .132 3.35 3 max toe (typ) in-process c c sheet of .635mm differential pairs shielded terminal strip by: qmss-xxx-xx.xx-x-d-dp-x-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 08/12/03 3 3 sheet scale: 2.5:1 revision r f:\dwg\misc\mktg\qmss-xxx-xx.xx-x-d-dp-x-xxx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
